PROSTRENGTH Rapid Set Mortar
PROSTRENGTH Rapid Set Mortar
Suitable for around the home and building site, patching around electric and plumbing fittings, re-pointing on block, brick and rendered surfaces, chasing conduits and covering pipework.
Covers approximately 1m2 at 2mm thick.
Click here to watch BCM for Tradies using PROSTRENGTH Rapid Set Mortar.
Safety Data Sheet
Brickwork Repairs
Drain Base Repairs
Fittings
Pipework
Toilet Pan Bedding
- Hardens in 10 minutes
- Excellent bond to concrete and masonry
- Convenient bag-in-bucket, mix up what you need
- Suitable for both internal and external use
Empty and mix only as much Rapid Set Mortar as can be mixed and placed within 5 minutes.
Add water gradually (approx 1.4 litres per 8kg bucket / 175ml per 1kg of dry product) and blend thoroughly to achieve a workable mix.
Note: Additional water may prolong setting and weaken the overall strength of the mortar.
IMPORTANT Ensure you are able to quickly transfer the blended mortar to the area you are applying it to, in order to avoid it setting in the mixing vessel. Product is expected to stiffen in 10minutes.
Apply the Rapid Set Mortar as required to complete the task at hand.
Tip: Clean all tools and equipment with water without delay after use.
15-20MPa at 3d
28MPa at 7d
40MPa at 28d
Note: This PROSTRENGTH Rapid Set Mortar compressive strength data was achieved under controlled laboratory conditions (tested according to AS1478.2), at 23 degrees Centigrade. They should be used only as a guide to potential strength as various factors can impact final strength results.
